5: Connecting The Antennas; 6: Preparing The Receiver - Sony HT-SF470 Operating Instructions Manual

5: Connecting the
antennas
Connect the supplied AM loop antenna
(aerial) and FM wire antenna (aerial).
Before connecting the antennas, be sure to
disconnect the AC power cord (mains lead).
FM wire antenna (aerial) (supplied)
AM loop antenna (aerial)
(supplied)
L
EZW-T100
R
AUDIO IN AUDIO IN
COAX IN
AUTO
VIDEO
CAL MIC SA-CD/CD TV
DC5V 0.7A MAX
HDMI
DVD IN
DMPORT
Notes
• To prevent noise pickup, keep the AM loop
antenna (aerial) away from the receiver and other
components.
• Be sure to fully extend the FM wire antenna
(aerial).
• After connecting the FM wire antenna (aerial),
keep it as horizontal as possible.
24
GB
DIGITAL ANTENNA
AM
OPT IN OPT IN
SAT/CATV
TV
ARC
BD IN SAT/CATV IN TV OUT

6: Preparing the receiver

Connecting the AC power cord
(mains lead)
Connect the AC power cord (mains lead) to a
wall outlet.
AC power cord (mains lead)
FRONT R
To the wall outlet
Performing initial setup
operations
Before using the receiver for the first time,
initialize the receiver by performing the
following procedure. This procedure can also
be used to return settings you have made to
their initial settings.
Be sure to use the buttons on the receiver for
this operation.
POWER /
ACTIVE STANDBY
?/1
1
Press ?/1 to turn on the
receiver.
2
Hold down ?/1 for a few
seconds until "CLEARED"
appears.
All the settings you have changed or
adjusted are reset to the initial settings.
SPEAKERS
FRONT L SUR R SUR L SUBWOOFER CENTER
MASTER VOLUME