Sony HT-SF470 Operating Instructions Manual page 9

About the indicators on the display
1 2 3
LPCM NIGHT SLEEP
qa
q;
Name Function
A LPCM
Lights up when Linear PCM
(Pulse Code Modulation) signals
are input.
B NIGHT
Lights up when the Night Mode
function is set to on (page 34).
C SLEEP
Lights up when the sleep timer is
activated (page 62).
D Input
Light up when the digital signal
indicators
is input.
HDMI Digital signal is input through
the HDMI IN jack.
COAX Digital signal is input through
the COAX IN jack.
OPT
Digital signal is input through
the OPT IN jack.
E Tuning
Light up to indicate the current
indicators
status of the radio station (page
35).
TUNED When receives a radio station.
ST When broadcasts in stereo mode.
F S-AIR
Lights up when the S-AIR
transmitter (not supplied) is
connected.
G MUTING
Lights up when the muting
function is activated.
H DTS
Lights up when the receiver is
decoding DTS signals.
Note
When playing a DTS format
disc, be sure that you have made
digital connections.
I Message
Displays the volume level,
display area selected input source, audio
input signal, etc.
4
HDMI COAX OPT TUNED
9
5 6
ST S-AIR
Name Function
J
D
Lights up when the receiver is
decoding Dolby Digital signals.
Note
When playing a Dolby Digital
format disc, be sure that you
have made digital connections.
K Dolby Pro
Lights up one of the respective
Logic indicators when the receiver
indicators applies Dolby Pro Logic
processing to 2 channel signals
in order to output the center and
surround channel signals.
PL Dolby Pro Logic
PLII
Dolby Pro Logic II
7 8
MUTING DTS
continued
9 GB