Sony HT-SF470 Operating Instructions Manual page 36

Tuning into a station directly
(Direct Tuning)
Enter the frequency of a station directly by
using the numeric buttons.
1
Press TUNER repeatedly to
select the FM or AM band.
You can also press INPUT SELECTOR
+/– on the receiver.
2
Press D.TUNING.
3
Press and hold SHIFT, then
press the numeric buttons to
enter the frequency.
Example 1: FM 102.50 MHz
Select 1 b 0 b 2 b 5 b 0
Example 2: AM 1,350 kHz
Select 1 b 3 b 5 b 0
If you have tuned in an AM station, adjust
the direction of the AM loop antenna
(aerial) for optimum reception.
4
Press and hold SHIFT, then
press ENTER.
If a wrong frequency is entered
"FM ---.--" or "AM ----" appears and then the
display returns to the current frequency.
If you cannot tune in a station
Make sure you have entered the right
frequency. If not, repeat steps 2 to 4. If you
still cannot tune in a station, the frequency is
not used in your area.
36
GB
Changing the AM tuning interval
(Models of area code SP1, TW2,
TH1 only)
The AM tuning interval can be set to either
10 kHz or 9 kHz.
1
Press TUNER repeatedly until
"AM" appears on the display.
2
Press MENU/HOME.
3
Press V/v repeatedly until "AM
STEP" appears on the display,
then press
"10K t 9K" or "9K t 10K" appears on
the display.
4
Press .
"COMPLETE" appears on the display.
The AM tuning interval is changed.
5
Press MENU/HOME.
Note
If you change the interval, AM preset stations will
be erased.
or b.