Sony HT-SF470 Operating Instructions Manual page 16

Installing the speakers on a flat
surface
HT-SF470 only
Before you install the center speaker and the
subwoofer, be sure to attach the supplied foot
pads to prevent vibration or movement as
shown in the illustration below.
Note
Attach the small foot pads to the center speaker and
big foot pads to the subwoofer.
Installing the speakers on the
speaker stand
For greater flexibility in positioning the
speakers, you are recommended to use the
speaker stand as below.
Model Speaker stand
HT-SF470 Supplied. For details, refer to
the supplied Quick Setup
Guide.
HT-SS370 Optional WS-FV11 or
WS-FV10D speaker stand
(available only in certain
countries).
For details, refer to the
operating instructions supplied
with the speaker stand.
16
GB
Installing the speakers on the
wall
You can install your speakers on the wall.
1
Prepare screws (not supplied)
that are suitable for the hook on
the back of each speaker. See
the illustrations below.
more than 25 mm
Hook on the back of the speaker
2
Fasten the screws to the wall.
The screws should protrude
8 mm to 10 mm.
HT-SF470 only
For the center speaker
8 mm to 10 mm
For the front speakers
8 mm to 10 mm
4 mm
5 mm
10 mm
160 mm
217 mm