4: Connecting The Audio/Video Components - Sony HT-SF360 Operating Instructions Manual

4: Connecting the audio/
video components
How to hook up your
components
This section describes how to hook up your
components to this receiver. Before you begin,
refer to "Component to be connected" below
for the pages which describe how to connect
the audio/video components.
Before connecting the cords, be sure to
disconnect the AC power cord (mains lead).
After hooking up all your components,
proceed to "5: Connecting the antennas" (page
25).
Component to be connected
To connect
TV
Audio components
• Super Audio CD player/
CD player
• DIGITAL MEDIA PORT
adapter
Components with HDMI jack
Video components
• Satellite tuner, Set-top box
• DVD player, DVD recorder
• VCR
Connecting audio components
The following illustration shows how to
connect audio components such as Super
Audio CD player or CD player and DIGITAL
MEDIA PORT adapter.
You can also view the images on the TV
screen by connecting the video output of the
DIGITAL MEDIA PORT adapter to the video
input of the TV.
See
page 20
page 21
page 22
page 24
A Audio cord (not supplied)
B Video cord (not supplied)
* The type of connector varies depending on the
DIGITAL MEDIA PORT adapter.
For details, refer to the operating instructions
supplied with the DIGITAL MEDIA PORT
adapter.
Super Audio CD player, CD player
Audio signal
L L
R R
AUDIO IN AUDIO IN
AUTO
CAL MIC VIDEO 1 TV
DC5V 700mA MAX
HDMI
DMPORT
DIGITAL
MEDIA PORT
adapter
A
DIGITAL TV
AUDIO IN COAX IN OPT IN OPT IN
VIDEO 2 SAT
SA-CD/CD
BD IN DVD IN SAT IN
TV
B
continued
21 US