Schwinn AD2i Assembly Manual page 18

LCD Display Data
The console display shows each workout measurement in sequence for 5 seconds:
Time
Time
The TIME display field shows the time count in the workout. The maximum display is 99:59. If the
time count is more, the display starts again at 0:00.
CAL
The CAL display field shows the estimated calories that you have burned during the exercise. The
maximum display is 9999. If the calorie count is more, the display flashes 9999.
Distance
The DISTANCE display field shows the distance count (miles or km) in the workout, to two decimal
places—for example, 1.50. The maximum display is 99.99. If the distance is more, the display
starts again at 0.00.
Note: To change the measurement units to English Imperial or metric, refer to the "Service
Mode" section in this manual.
Speed
The SPEED display field shows the machine speed in kilometers per hour (km/h) or miles per hour
(mph), to one decimal place—for example, 10.5 or 0.0. The maximum display is 99.9.
RPM
The RPM display field shows the machine revolutions per minute (RPM). The maximum display is
200.
18
Calories Distance Speed Pedal
revolutions
Numeric
display