Citizen Red Arrows AT8060-50E Manual page 9

Charging your watch
◆ Power save feature
When the watch is not exposed to light for 30 minutes or longer, such as when
you store it in a dark place, the second hand automatically stops to save the power.
However, the watch continues to work internally.
• W hen the crown is in position 1 or 2, the power save feature will not activate.
• The power save feature can not be activated or deactivated manually.
◆ To cancel the power save feature
When the watch is exposed to light sufficient for charging, the power save feature
is automatically canceled and normal time indication will resume.
16
◆ Checking the power reserve
Checking the current power reserve.
1. Ensure that the crown is in position 0 .
2. Press and release the lower right button Ⓐ .
0 1 2
The chronograph minute hand moves to indicate
the power reserve.
• For details on the power reserve level, see the
Ⓐ
3. Press and release the lower right button Ⓐ
to finish the check procedure.
• The current time indication will resume
50
Note: You cannot perform this operation when
40
Charging your watch
next page.
automatically when leaving the watch for
approx. 10 seconds.
using the chronograph.
17