Adjusting The Time/Calendar Manually - Citizen Red Arrows AT8060-50E Manual

Receiving the time signal manually (On demand reception)
• T he watch will not receive the time signal when in a low charge state as indicated by
the second hand moving in two second increments (the insufficient charge warning).
• If the current location is different from the city you set, the watch will not receive the
time signal.
• Press and hold the lower right button
reception.
• The reception operation is complete when normal time indication resumes.
44
Ⓐ
for two or more seconds to cancel the signal

Adjusting the time/calendar manually

Manually adjust the time/calendar when the watch cannot receive the time signal.
Ⓑ
1. Pull the crown out to position  .
0 1 2 2. Press and hold the upper right button Ⓑ for
two or more seconds.
The second hand moves to the 30-second position
and the chronograph minute hand moves to the
60-minute position.
Ⓑ 3. Pull the crown out to position  .
The second hand moves to the 0 second position
0 1 2
indicating the time and calendar may be manually
adjusted.
45