Troubleshooting - Citizen Red Arrows AT8060-50E Manual

Troubleshooting

If you have a problem with your watch, check the table below.
Problems with time signal reception.
Symptoms
Push the crown in to position 0.
Avoid things likely to interfere with the time signal and
place the watch with the 9:00 position facing toward
the station.
Reception is unsuccessful
in a receivable area.
Do not move the watch until the reception has finished.
When the second hand moves once every two
seconds, the watch cannot receive the time signal.
Fully charge the watch.
Check and correct the current reference position.
The correct time and date
are not indicated after Check the city setting.
successful reception.
Check the daylight saving time setting.
54
Remedies Page
－
34, 39
34
14
51
22
27
The hands do not work properly.
Symptoms
The hands move in an
Stop the chronograph.
unexpected direction.
The second hand moves
Fully charge the watch.
once every two seconds.
Push the crown in to position 0.
Fully charge the watch by exposing it to direct sunlight
All hands stop moving.
until the second hand starts moving once every one
seconds. After charging, signal reception automatically
starts. (Recovery automatic reception)
The chronograph cannot be used when the power
The watch does not enter
the chronograph mode. reserve is at level 0. Fully charge the watch.
The chronograph minute
When the power reserve is insufficient, level 1 is
hand does not point in the
displayed for the power reserve. Fully charge the watch.
12 o'clock direction.
The hands start turning
The watch is canceling the power save feature. Wait
rapidly as you take the
until the rapid movement stops.
watch out of the case.
Troubleshooting
Remedies Page
20
14
－
14
12
12
16
55