Citizen Red Arrows AT8060-50E Manual page 3

Before using this watch
After unpacking, the following must be done before using the watch:
◆ Checking the power reserve Page 17
For optimal performance, ensure your watch is fully charged prior to use.
◆
Setting the World Time Page 22
Select the city or time difference for which you want to indicate the time and date.
◆
Checking the time signal reception Page 41
Check the result of the time signal reception.
This watch has a rechargeable cell which is charged by
exposing the dial to light.
Expose the dial to direct sunlight regularly to charge the watch.
For details of charging, see pages 12 to 19.
4
◆ Protective stickers
Be sure to remove any protective stickers that may be on your watch (case back,
band, clasp, etc.) Otherwise, perspiration or moisture may enter the gaps between
the protective stickers and the parts, which may result in a skin rash and/or
corrosion of the metal parts.
◆ Band adjustment
We do not recommend attempting to adjust the watch band yourself. Special
expertise and experience is required for proper adjustment. If not adjusted
correctly, the band may become detached leading to loss of your watch. (Some
retailers may supply a band adjustment tool with your purchase).
For band adjustment, we recommend you consult the retailer from where the
watch was purchased or your nearest Authorized Citizen Service Center. Some
repair shops may charge a nominal fee for adjustment if the watch was not
purchased directly from them.
Before using this watch
5