Citizen Red Arrows AT8060-50E Manual page 16

Setting Daylight Saving Time
◆ Switching ON/OFF of Daylight Saving Time
1. Pull the crown out to position  .
Ⓑ
0 1 2
2. Press and release the upper right button Ⓑ
3. Push the crown in to position 0 to finish the
50 10 ON
SMT
40
20
OFF
30
The chronograph minute hand indicates the current
daylight saving time ON/OFF setting.
to adjust the daylight saving time setting.
Each time you press and release the upper right
button Ⓑ , the chronograph minute hand points
SMT ON and SMT OFF alternately to indicate the
daylight saving time ON/OFF setting is switched.
setting.
◆ Auto/manual adjustment of Daylight Saving Time
1. Pull the crown out to position  .
Ⓑ
The chronograph 1/20 second hand indicates the
0 1 2 current auto/manual setting.
2. Press and hold the lower right button Ⓐ for
two or more seconds.
S
M
OK T
Each time you hold down the lower right button
RX W
T
NO
F
S
Ⓐ Ⓐ for two or more seconds, the chronograph 1/20
second hand points the 12 o'clock direction (auto)
and the 6 o'clock direction (manual) alternately.
S
00
M
90 10 While manual setting is enabled, the daylight saving time
OK T
ON/OFF setting is not changed even when the watch
80 20
receives the time signal. Refer to the procedure described
RX
W
70 30 on the previous page to change the ON/OFF setting.
NO T
60 40
50
F
3. Push the crown in to position 0 to finish the
S
setting.
Setting Daylight Saving Time
31