Setting Daylight Saving Time - Citizen Red Arrows AT8060-50E Manual

Setting Daylight Saving Time

◆ Daylight saving time
Daylight Saving Time is a system adopted in some countries/areas to gain an
extra hour of daylight during summer by advancing clocks by one hour. In an
area where the daylight saving time is in effect, the time signal contains a daylight
saving time check signal.
When receiving the daylight saving time check signal, this watch automatically
enables/disables (turns ON/OFF) the Daylight saving time setting.
• D aylight Saving Time can be manually disabled in an area where the time signal
can be received but the daylight saving time is not in effect. (See pages 30 and 31.)
• D aylight Saving Time can be manually enabled even if the watch is outside
the area. (See pages 30 and 31.)
• The daylight saving time rules may change depending on the country or area.
• A daylight saving time period is different depending on the country or area.
26
◆ Checking the time currently shown
1. Pull the crown out to position  .
Daylight Saving Time indication The second hand indicates the current city
(ON/OFF) (Chronograph minute
setting; the chronograph minute hand indicates
hand)
the daylight saving time ON/OFF setting; and
the chronograph 1/20 second hand indicates the
daylight saving time auto/manual setting.
0 1
Auto/Manual DST Indication
(Chronograph 1/20 second hand)
Setting Daylight Saving Time
• Check the settings by referring to the table in
the next page.
27