Panasonic EBL512 G3 Operating Instructions Manual page 39

EBL512 G3 V. 3.0.X - FIRE ALARM SOLUTIONS OPERATING INSTRUCTIONS
MORE THAN ONE ALARM POINT ACTIVATING FIRE ALARM.
Example; fire alarm in zone 002, address 03 (within zone 002) and nine other fire alarms (of which the latest alarm is 003-11) in four
different zones:
Fire alarm: 002-03
Pre-warning
002-03
Zone
User definable alarm text for 002-03
Latest alarm: 003-11
Menu
"SMOKE" after the presentation number is automatically added depending on the type of alarm point (i.e. SMOKE, HEAT, MULTI or
MCP).
User definable alarm text for each alarm point and zone line input can an individual alarm text be shown (if programmed). Up to 40
characters can be used.
ADDITIONAL INFORMATION
First alarm, Latest alarm, Alarm number and number of zones in alarm.
LEDs "Alarms queued" blinking (0.4 / 0.4 sec.) are indicating that more than one fire alarm is activated. To scroll through the alarm
points, use the push button "Alarms queued".
Next zone. Use the soft key "Next zone" to scroll through the zones in alarm.
When scrolling through the zones, the first alarm point activated in the next zone will be shown. The "Next zone" button will be avail-
able only if there are alarms in more than one zone. The first alarm will be automatically displayed again, 20 seconds after the latest
time the "Alarms queued" or "Next zone" buttons where used. The printer (if available) will print each fire alarm, for example.
** Fire Alarm **
Zone 002 Address 03
SMOKE
YYYY-MM-DD hh:mm
User definable alarm text
(if programmed)
Reset of the fire alarms, see section
Alarm number 1 (of 10)
Address
SMOKE
4 zone in alarm
on page 50.
19. ALARM RESET
39