Table of Contents
Advertisement
V3-Razor Repair Manual
Fig 15
6. To replace, align the display module assembly to the flip assembly.
7. Carefully lower the display module into the flip assembly. Ensure that
all of the display none of the display assembly components are damaged.
8. align the flip display flex to the flex connector on the flip display
assembly and gently press down on the flex connector until properly
seated.
9. Replace the camera assembly, flip assembly cover, transceiver board,
rear housing, antenna, SIM, battery, and battery connector as described
in the procedures.
Page 24
Document –ED05020 rev.1.0
This document is considered an uncontrolled document when printed
Advertisement
Table of Contents
