Motorola V3-Razor Repair Manual page 17

V3-Razor Repair Manual
3. Release the four housing latches by inserting the pointed end of the
plastic disassembly tool into the openings on the rear housing.
4. Carefully rotate the rear housing away from the front housing and flip
assembly
.
5. Use the disassembly tool to unseat the flex connector from it's socket.
6. Lift the rear housing assembly away from the phone.
7. To replace, carefully align the flex connector to it's socket on the rear
housing assembly, then gently press down on the flex connector until it is
properly seated in it's socket.
8. Rotate the rear housing assembly so it sits over the phone.
9. Align the housing latches with the corresponding openings on the front
housing. Gently press the housings together until the catches snap into
place.
Page 17
Document –ED05020 rev.1.0
This document is considered an uncontrolled document when printed