Table of Contents
Advertisement
5.
Remove the five Phillips M2.0 × 3.0 screws that secure the system board to the computer.
6.
Lift the right side of the system board up at an angle (1).
7.
Pull the system board up and toward the right to release the connectors from the left side of the
computer, and then remove the system board (2).
IMPORTANT:
system board.
Reverse this procedure to install the system board.
62
Chapter 6 Removal and replacement procedures for authorized service provider parts
Do not remove memory shielding from the system board when replacing memory or the
Advertisement
Table of Contents
Troubleshooting
