Touchpad - HP mt45 Maintenance And Service Manual

Touchpad

Table 6-8 Touchpad descriptions and part numbers
Description
Touchpad for use in models without an NFC module
Touchpad for use in models with an NFC module
Before removing the touchpad, follow these steps:
1. Prepare the computer for disassembly
2. Remove the bottom cover (see
3. Remove the battery (see
Remove the touchpad:
1. Disconnect the NFC module cable from the ZIF connector on the NFC module (1).
2. Disconnect the touchpad button board cable from the ZIF connector on the touchpad (2).
3. Disconnect the card reader cable from the ZIF connector on the touchpad (3).
4. Remove the five Phillips M2.0 × 2.5 screws (1) that secure the touchpad to the computer.
(Preparation for disassembly on page
Bottom cover on page
Battery on page 44).
32).
32).
Component replacement procedures
Spare part number
L62731-001
L62732-001
53