Removing The System Board - Dell OptiPlex 3010 Small Form Factor Owner's Manual

Table of Contents

Advertisement

10. Follow the procedures in
Related Links
Removing the Power Supply

Removing the System Board

1.
Follow the procedures in
2.
Remove the cover.
3.
Remove the
front
bezel.
4.
Remove the
drive
cage.
5.
Remove the
expansion
6.
Remove the
heat sink and
7.
Remove the
fan
shelter.
8.
Disconnect all the cables connected to the system board, and move the cables away from the chassis.
9.
Lift and release the expansion-card latch, to gain access to the screws securing the system board.
10. Remove the screws that secure the system board to the chassis.
28
After Working Inside Your
Before Working Inside Your
cards.
processor.
Computer.
Computer.

Advertisement

Table of Contents
loading

This manual is also suitable for:

D04s

Table of Contents