Removing The Front Bezel; Installing The Front Bezel; Removing The Expansion Card - Dell OptiPlex 3010 Small Form Factor Owner's Manual

Removing the Front Bezel

1. Follow the procedures in
2. Remove the cover.
3. Pry the front bezel retention clips away from the chassis.
4. Rotate the bezel away from the computer to release the hooks on the opposite edge of the bezel from the chassis.
Related Links

Installing the Front Bezel

Installing The Front Bezel
1. Insert the four hooks along the bottom edge of the front bezel into the slots on the chassis front.
2. Rotate the bezel toward the computer to engage the front bezel retention clips until they click into place.
3. Install the cover.
4. Follow the procedures in
Related Links
Removing The Front Bezel

Removing the Expansion Card

1. Follow the procedures in
2. Remove the cover.
3. Remove the front bezel.
4. Rotate the release tab on the card-retention latch upward.
10
Before Working Inside Your
After Working Inside Your
Before Working Inside Your
Computer.
Computer.
Computer.