Removing The Drive Cage - Dell OptiPlex 3010 Small Form Factor Owner's Manual

9. Install the expansion
10. Install the drive cage.
11. Install the front bezel.
12. Install the cover.
13. Follow the procedures in
Related Links
Removing the System Board

Removing the Drive Cage

1. Follow the procedures in
2. Remove the cover.
3. Remove the front bezel.
4. Remove the data cable and power cable from the back of the optical drive.
5. Slide the drive-cage handle toward the back of the computer into the unlocked position.
6. Rotate the drive cage upward using the handle and lift the drive cage free off the chassis.
30
card.
After Working Inside Your
Before Working Inside Your
Computer.
Computer.