Dell OptiPlex 3010 Small Form Factor Owner's Manual page 40

Option
Table 8. Virtualization Support
Option
Virtualization
VT for Direct I/O
Table 9. Maintenance
Option
Service Tag
Asset Tag
SERR Messages
Table 10. Image Server
Option
Lookup Method
ImageServer IP
ImageServer Port
Client DHCP
40
Description
This option is set to Thorough by default.
Description
This option specifies whether a Virtual Machine Monitor (VMM) can utilize the
additional hardware capabilities provided by Intel® Virtualization Technology. Enable
Intel Virtualization Technology - This option is disabled by default.
Enables or disables the Virtual Machine Monitor (VMM) from utilizing the additional
hardware capabilities provided by Intel® Virtualization technology for direct I/O. Enable
Intel Virtualization Technology for Direct I/O - This option is disabled by default.
Description
Displays the Service Tag of your computer.
Allows you to create a system asset tag if an asset tag is not already set. This option is
not set by default.
Controls the SERR message mechanism. This option is not set by default. Some
graphics cards require that the SERR message mechanism be disabled.
Description
Specifies how the ImageServer looks up the server address.
• Static IP
• DNS (enabled by default)
NOTE: This field is only relevant when the "Integrated NIC" control in the "System
Configuration" group is set to "Enabled with ImageServer".
Specifies the primary static IP address of the ImageServer with which the client
software communicates. The default IP address is 255.255.255.255.
NOTE: This field is only relevant when the "Integrated NIC" control in the "System
Configuration" group is set to "Enabled with ImageServer" and when "Lookup
Method" is set to "Static IP".
Specifies the primary IP port of the ImageServer with which the client communicates.
The default IP port is 06910.
NOTE: This field is only relevant when the "Integrated NIC" control in the "System
Configuration" group is set to "Enabled with ImageServer".
Specifies how the client obtains the IP address.
• Static IP
• DNS (enabled by default)