Next steps
1. Connect the
battery
cable to the connector on the system board.
2. Replace the
base cover
3. Replace the
SD memory card
4. Follow the procedure in
Coin-cell battery
Removing the coin-cell
Prerequisites
1. Follow the procedure in
2. Remove the
SD memory card
3. Remove the
base cover
4. Disconnect the
battery
Steps
1. Using a plastic scribe, gently pry the coin-cell battery out of the slot on the I/O board [1].
2. Remove the coin-cell battery away from the system [2].
24
Removing and installing components
after working inside your computer
before working inside your computer
cable from the connector on the system board.