Installation; Before Installation - Defy DBO482 Instruction Manual

3. Installation

The appliance must be installed by a
qualified person in accordance with national
regulations. Installation is the buyer's
responsibility. The manufacturer accepts no
liability for this service. Any action that the
manufacturer has to take as a result of an
erroneous installation will not be covered by
the warranty.
Preparation of location and
electrical installation for the
appliance is the customer's
responsibility.
DANGER: The appliance must be
installed in accordance with all
local electrical regulations.
DANGER: Prior to installation,
visually check if the appliance has
any defects on it. If so, do not have
it installed. Damaged appliances
cause risks for your safety.

Before installation

The appliance is intended for installation in
household kitchen cabinets. A safety
distance must be left between the appliance
and the kitchen walls and furniture. See
figures on following page: "Built in oven cut
outs" (values in mm).
Cooking appliances generate considerable
heat. The layout and materials of the
mounting cabinet should take account of
these characteristics.
Surfaces, surrounding edges, synthetic
•
laminates and adhesives immediately
adjacent to the appliance should be able
to withstand temperatures of up to 100°C
without delaminating or discoloring.
Kitchen cabinets must be set level and
•
fixed.
If there is a drawer beneath the oven, a
•
shelf must be installed between the oven
and drawer.
Carry the appliance with at least two
•
persons.
Page 9
Do not install the appliance next to
refrigerators or freezers. The heat
emitted by the appliance will lead to
an increased energy consumption
of cooling products.
The door and/or handle must not
be used for lifting or moving the
appliance.
Do not place any objects onto the
appliance and move it in upright
position.
Check the general appearance of
your appliance for any damages
that might have occurred during
transportation.
Under-counter oven installation
Note: The oven cavity must vent
•
through the front only. Avoid gaps
between the cavity sides and the
underside of the worktop.
Insert the oven into the cupboard.
•
Open the door to expose the fixing holes
•
in the side trims.
Secure the oven by 4 countersunk screws
•
(fasteners are not supplied).
The hob should be installed in a ventilated
•
cupboard fitted with a sturdy worktop .
Secure the hob using the fixing brackets
•
provided.
Note: Hob installation for under-counter
oven
Hobs have their own dedicated owner's
•
manual, detailing installation and operating
instructions.
Do not discard the hob packaging before
•
first retrieving this manual.
Defy Slimline under-counter ovens may be
•
installed at eye level if so desired.
A wiring extension kit is available from the
•
nearest Defy Service Centre.
If you have an older level hob you must
•
purchase a connector block adaptor kit
from your nearest Defy spares outlet.
Final check
1. Connect the oven and switch on the
power.
2. Check the functions.