Install Motor Cover
1. Snap Tinnerman clips on motor cover into place on base frame assembly, motor side shrouds, and front cover.
Item
1
2. Install screw securing motor cover to front shroud using a Phillips screwdriver.
Complete installation
1. Plug power cord into power outlet.
2. Operate unit at all levels to verify proper operation.
Description
Motor Cover
Item
1
Screw, M6 x 16, Phillips Pan Head
Tighten hardware to 3 ft-lb (4 Nm).
Page 63 of 98
Qty.
1
Description
Qty.
1