3. Install screws securing adapter plate to frame using a Phillips screwdriver. Tighten to 1.8 ft. lbs. (2.5 Nm).
4. Install the two cables to incline home switch, noting the colors of wire insulation and their positions on incline
home switch.
Install Motor Cover
1. Snap Tinnerman clips on motor cover into place on base frame assembly, motor side shrouds, and front cover.
Item
1
2. Install screw securing motor cover to front shroud using a Phillips screwdriver.
Description
Motor Cover
Item
1
2
Item
1
Screw, M6 x 16, Phillips Pan Head
Tighten hardware to 3 ft-lb (4 Nm).
Page 48 of 98
Description
Screw
Incline home switch cables
Description
Qty
3
2
Qty.
1
Qty.
1