6. Remove four nylon nuts, four flat washers, and four hat washers securing drive motor using a 13 mm socket with
extension.
7. Lift drive motor out of frame.
8. Remove two set screws securing drive pulley to drive motor using a 3 mm Allen wrench.
9. Remove drive pulley and key from drive motor.
10. Remove bolt securing flywheel onto drive motor using a 15 mm socket wrench.
11. Remove flywheel from drive motor using gear puller.
Item
1
2
3
4
Item
1
2
3
4
Item
1
2
3
Page 20 of 98
Description
Drive motor
Nylon nut
Flat washer
Hat washer
Description
Drive motor
Set screw
Drive pulley
Key
Description
Drive motor
Flywheel
Bolt
Qty
1
4
4
4
Qty
1
1
1
1
Qty
1
1
1