Hybrid And Sensor Connection Cables; Barrier Box - Siemens LDS 6 Compact Operating Instructions

8.3

Hybrid and sensor connection cables

General
Configuration hybrid ca‐
ble
Cable sheath
Dimensions
- Diameter
- Length
Impact resistance
Maximum tensile
strength
Minimum bending radi‐
us
Climatic conditions
Ambient temperature
Rel. humidity
8.4

Barrier box

Design, enclosure
Degree of protection
Dimensions (without wall mounting kit)
Weight (fully equipped)
Permissible ambient temperature (operation)
LDS 6 & Optics housing CD 6 Compact Operating Instructions
Compact Operating Instructions, 12/2022, A5E03314905-AB
Two optical fibers and two twisted copper wires in one cable for 24 V DC.
Single-mode optical fiber configured at both ends with E2000 angle connec‐
tors. Multimode optical fiber configured at both ends with SMA connectors.
For installations in Ex zones non-intrinsically-safe cables have to be spatially
separated from intrinsically-safe lines
Oil-resistant polyurethane
<8 mm (5/16"),
total length of the hybrid cable and sensor connection cable must not exceed
250 m (820 ft) in Ex zone 0 and Ex zone 1 installations and not exceed 700 m
(2 300 ft) in EEx zone 2 and non Ex installations.
For lengths >500 m (1 640 ft), an external power supply must be additionally
ordered.
100 N/cm
200 N (45 lbf)
12 cm (4 3/4")
-40 ... +80 °C (-40 ... +176 °F) during operation, transport and storage
-5 ... +50 °C (23 ... 122 °F) during installation
<95 % relative humidity, above dew point
IP45 according to EN 60529
400 x 240 x 155 mm (15 3/4 x 9 1/2 x 6 1/8")
Approx. 6.8 kg (15 lbs.)
-20 ... +60 °C (-4 ... 140 °F)
Technical data
8.4 Barrier box
61