Atomic Time - La Crosse Technology 616-12667-INT Setup Manual

Power Up
1. Insert 2-AA batteries into your Outdoor Sensor.
2. Insert the 5 volt power cord into an outlet, then into your Projection
Clock. Optional: Insert 3-AAA batteries for backup.
3. Set time, date, etc.
4. Once the sensor is reading to your clock, place the sensor outside in a
shaded location. View our sensor mounting video here:
bit.ly/th_sensor_mounting
TX141-Bv3
Outdoor Sensor

Atomic Time

• The clock will search for the Atomic Time Signal at power up and at UTC
7:00, 8:00, 9:00, 10:00, and 11:00.
• The Atomic Time Signal Icon
when it has connected.
• From the normal time display, press the
stop a search for the WWVB time signal. For information about WWVB
visit: bit.ly/AtomicTime
Note: The Backlight will be off temporarily while searching for the WWVB time signal.
AAA
AAA
AAA
will flash while searching and be solid
SET button to manually start or
616-1410B / 616-41667
Projection Clock
2