Related Manuals for La Crosse Technology 616-1410B
Summary of Contents for La Crosse Technology 616-1410B
- Page 1 Atomic Projection Clock with Indoor/Outdoor Temperature SET UP GUIDE MODEL: 616-1410B / 616-41667 616-1410Bv2 / 616-41667v2...
-
Page 2: Atomic Time
3. Set time, date, etc. 4. Once the sensor is reading to your clock, place the sensor outside in a shaded location. View our sensor mounting video here: bit.ly/th_sensor_mounting TX141-Bv3 616-1410B / 616-41667 or TX141-Bv4 Outdoor Sensor 616-1410Bv2 / 616-41667v2 Projection Clock Atomic Time •... -
Page 3: Settings Menu
Settings Menu IMPORTANT: Only press or hold one button at a time. 1. Hold the button until the display changes to enter the Settings Menu. 2. Press and release the buttons to adjust values. 3. Press and release to confirm values. 4. - Page 4 Backlight • Press the SNOOZE/LIGHT button to adjust the backlight to adjust the backlight intensity. There are 4 levels, plus an off option. Auto Dim Program your display to automatically dim during preselected times. 1. Hold the SNOOZE/LIGHT button to enter the Auto-Dim Settings Menu. 2.
-
Page 5: Custom Display
Custom Display Press the CALENDAR button to change the middle section of your display. Choose between full weekday, abbreviated weekday with date, or alarm time. Projection Image 1. Hold the button to enter the Projection Settings 2. Use the buttons to change projection selection. 3. -
Page 6: Time Alarm
Projection Brightness & Rotation Brightness: Press the button to change the Projection Brightness (High, Low, or Off). Rotation: Use the Rotation Wheel on the back of the projection arm to change the projection orientation 270 degrees. Tilt The Projection Arm: The Projection Arm can tilt forward and backward to adjust the location of the projection image on a wall or ceiling. -
Page 7: Temperature Trend Arrows
Snooze: • When alarm sounds, press the SNOOZE button to silence alarm for 10 minutes. The Snooze Icon will flash. • Press any button except SNOOZE to silence the alarm for 24 hours. • When alarm ends by button press or time out after 2 minutes, GOOD DAY will show briefly then return to normal time display. -
Page 8: Outdoor Temperature
Outdoor Temperature If you are seeing NO or dashes for your outdoor readings, please try the following steps: 1. Hold the button to search for your outdoor sensor. The Reception Indicator will begin to animate. 2. If after 3 minutes the sensor still isn’t connected, bring the sensor inside next to the display and remove power from both the sensor and clock. -
Page 9: Specifications
We’re Here to Help Specifications Projection Clock (616-1410B / 616-41667) or If you require additional support, get in touch (616-1410Bv2 / 616-41667v2) with our friendly customer support team Temperature Range: 32°F to 99°F based in La Crosse, WI. (0°C to 37°C) Phone: 1.608.782.1610... - Page 10 Warranty Info FCC Statment This equipment has been tested and found to comply with La Crosse Technology, Ltd. provides a 1-year the limits for a Class B digital device, pursuant to part 15 limited time warranty (from date of purchase) on of the FCC Rules.