Advertisement
• Hold the PLUS (+) button to start or stop a manual search for the WWVB Atomic Time Signal.
• The WWVB Tower Icon
• For information about WWVB Atomic Time visit:
Set Alarm:
1. Hold the ALARM button to enter Alarm Settings.
2. Use the + or - button to adjust values.
3. Press the ALARM button to confirm and move to next item.
Silence a sounding alarm: Press any button except SNOOZE to
silence alarm for 24 hours.
Activate/Deactivate Alarm:
• Press the ALARM button once to view alarm time.
• While viewing alarm time, press the ALARM button to
deactivate or activate the alarm.
• The Bell Icon
will show when alarm is active.
Snooze:
• When the alarm sounds, press the SNOOZE button to silence
the alarm for 10 minutes. Zz will show next to the Bell Icon.
Note: The alarm will sound with increasing frequency for two minutes, then shut off completely if
not deactivated.
Alarm and Snooze
W W V B ATO M I C TI ME SI GN A L
will flash when searching and be solid when signal is received.
AL ARM
bit.ly/AtomicTime
Alarm and Snooze Inactive
Page | 5
Advertisement
