Table of Contents
Advertisement
Installation Procedure
Step 2 Unpacking
Unpacking the indoor unit
1 Open the indoor unit package.
2 Remove the top and middle cushions.
3 Remove the bottom cushion.
Unpacking the outdoor unit
1 Pull out the outdoor unit from the package.
2 Remove the top cushion.
3 Remove the 4 screws from the wooden pallet.
4 Remove the wooden pallet.
Step 3 Checking and preparing
accessories
The following accessories are supplied with the
air conditioner. Their type and quantity may differ
depending on the specifications.
Accessories in the indoor unit package
Fixing bracket for indoor
unit (1)
Installation manual (1)
Batteries for remote
control (2)
M4 X L12 screws (4)
34
English
Remote control (1)
Remote control holder
(1)
Insulation for piping(1)
M4 X L14 screws (4)
Pipe outlet protection
rubber (1)
Accessories in the outdoor unit package
Drain cap (3)
Rubber leg (4)
Step 4 Drilling a hole through a wall
1 Determine the position of a 60 to 65 mm hole
considering possible directions of the pipe bundle and
minimum distances between the hole and installation
plate.
2 Drill the hole that slopes slightly downward (15°).
Indoor unit
Ø 60~65 mm
Insulation for drain hose
(1)
Drain plug out (1)
Outdoor
Advertisement
Table of Contents
