Samsung AF MV1MAEENTC Series User & Installation Manual page 44

Installation Procedure
Step 14 Fixing and insulating the
connection part for refrigerant pipes
CAUTION
∙ Before wrapping the connection part for refrigerant
pipes, be sure to check whether there is gas leakage
on the connection part.
1 Wrap the foam insulation around the connection
part as shown in the figure. This wrapping minimises
condensation.
High Low
pressure pressure
pipe pipe
Pipe insulation
Insulator for pipe
connection part
30 mm or more
NOTE
∙ Use polyethylene foam over 5 mm thick to insulate
the connection.
2 Fasten the pipes with a pipe clamp and fix it with
screws.
44
English
WARNING
∙ Remove the middle part of the pipe outlet protection
rubber before inserting the pipe.
Pipe outlet
protection rubber