30
To see the Smart Device's screen on the projector
To see the Mobile Device's screen on the projector
1
Enable Screen Share mode on the mobile device.
2
Your projector will be displayed in the list of available devices.
3
Select your projector and request connection.
4
Select accept in the connection request popup window.
5
After the connection is established, the projector will display the screen of the
connected device.
•
When you connect [Screen Share] for the first time, a popup will appear which
allows you to select [Accept], [Decline] or [Block].
– [Accept]: You can connect the device. No connection popup will appear from
the second time.
– [Decline]: Do not connect the device. If you try to connect again, the popup
will appear.
– [Block]: Do not connect the device. Even if you try to connect again, the
popup will not appear and the connection will not work.
– To turn off [Block], go to
→ [External Devices] and select [Delete Connection History].
•
For a reliable connection always keep the connected device to your projector
updated to the latest OS version.
•
Depending on the model or manufacturer of the smart device, the Screen Share
feature may not be supported.
•
Connect the device to a 5 GHz router because the performance may be affected
by your wireless environment.
•
The response rate may vary, depending upon the user's environment.
•
It differs among devices. For more information on the device you want to
connect to, refer to its user guide.
•
If connection fails repeatedly, turn off the projector and the device you want to
connect to, then turn them back on and try again.
(Q. Settings) →
→ [General] → [Devices]