LG CineBeam PU700R-GL Owner's Manual page 128

Setting [Safety]
(Q. Settings) →
To set [Safety], set it to [On].
• [Application Locks]
You can lock or unlock the application.
– The lock function is not immediately available for the currently running
application.
•
[Input Locks]
You can lock or unlock the Input Locks.
• [Reset Password]
Set or change the password for the projector.
– The initial password is set as "0000" .
When France or Norway is selected for Country, the password is not "0000"
but "1234" .
Resetting a Lost Password
If you lose the password you set, you can reset it as follows:
1
(Q. Settings) →
Select
2
→
Press
master password input window will appear.
3
Enter the numbers "0313" in the master password input window, then press
[Enter]. The password will be reset.
→ [General] → [System] → [Safety]
→ [General] → [System] → [Safety].
→ →
on the remote control. The
81