72
[Usage Limits Setting]
(Q. Settings) →
You can use the projector in the set time period only. Outside of the set time period,
you must enter your password to use the projector.
1
Set [Enable the function] to [On].
2
Set [Start Time] and [End Time].
Selecting [Repeat] will activate this feature every day.
3
Select [Set]
[Volume Limit Mode]
(Q. Settings) →
Set [Enable the function] to [On]. The volume cannot be raised above a certain level for
the protection of your hearing.
•
[Volume Limit Mode] may not work for audio devices connected to the HDMI
(ARC)/headphone port.
[Screen Time Reports]
(Q. Settings) →
You can check your projector usage time.
→ [General] → [Family Settings] → [Usage Limits Setting]
→ [General] → [Family Settings] → [Volume Limit Mode]
→ [General] → [Family Settings] → [Screen Time Reports]