LG CineBeam PU700R-GL Owner's Manual page 145

98
Troubleshooting Network Connection Issues
Please check the list below when you experience the following symptoms during use of
the product. It may not be a failure.
Before connecting to a wireless network, check the name and password of the Wi-Fi
device to connect.
You can check the network connection status as shown below.
(Q. Settings) →
•
[Other Network] → [Advanced Wi-Fi Settings]
• Some models may support the [Wi-Fi Connection] function only.
• Check the projector or the AP (Router).
•
Check the connection status of the projector, AP (Router) and Cable Modem.
• Power off and power on in the following order;
1. The Cable Modem, wait for the Cable Modem to reset.
2. Turn your cable modem off and back on, and wait for the device to reset.
3. The projector.
• If you want to establish a wireless connection check the following points as well.
1. Set your router's SSID (network name) or wireless channel.
2. Set your router's security key.
If you do not know this setting, check the router's instruction manual and the
manual provided by the Internet provider. If you are still not sure, contact the
router company or the Internet company.
•
If you are using a static IP, enter the IP directly.
→ [General] → [Network] → [Wi-Fi Connection] →
When X appears next to projector