T he MedView can be directly mounted to a display using the optional Iron Bow VESA
mounting bracket kit, Part # MEDVIEW-C-BRKT300-A01. The combination of
MedView and display can then be used in a tabletop configuration, or wall mounted, as
required. The customer is responsible for ensuring that the maximum weight (MedView
plus Monitor plus mounting brackets) can be supported by the existing wall mount.
Figure 8. MedView Mounted Above Display
Attaching MedView to Display Mounting Bracket
The 100mm x 100mm VESA mounting bracket, Figure 8. below, is designed to allow
maximum adjustment of the location of the MedView when mounted on a display. The
top plate of the mounting bracket, Figure 9. below, incorporates a series of attachment
holes which line up with the threaded holes on the base of the MedView.
Figure 9. MedView 100mm
Figure 10. MedView Mounting Bracket Top
Mounting Bracket
Plate Access Holes
Copyright 2021 Iron Bow Technologies
14