Wall Mounting - Cisco ISA550 Quick Start Manual

• Mechanical Loading: Be sure that the security appliance is level and
stable to avoid any hazardous conditions.
To place your security appliance on a desktop, install the supplied four
rubber feet on the bottom of the security appliance. Place the security
appliance on a flat surface.

Wall Mounting

The wall mounting hardware is user-supplied. We recommend that you use
the following mounting screws to install your security appliance to the wall.
The wall-mounting features on the bottom of the unit allow the front of the
unit to face either upward or downward.
2
1 8 mm/0.32 in
Insecure mounting might damage the device or cause injury.
W
ARNING
Cisco is not responsible for damages incurred by improper
wall-mounting.
Determine where you want to mount the security appliance. Verify
S 1
TEP
that the surface is smooth, flat, dry, and sturdy.
Secure two M3 x 0.63 inch (16 mm) pan head wood screws, with
S 2
TEP
anchors, into the wall 9.21 inches (234 mm) apart horizontally.
Leave about 1/8 inch (3 to 4 mm) of the screw threads beneath the
screw head exposed.
Place the wall-mount slots over the screws and slide the unit down
S 3
TEP
until the screws fit snugly into the wall-mount slots.
Cisco ISA500 Series Integrated Security Appliances Quick Start Guide
1
3
2 25 mm/0.98 in
4
3 6.5 mm/0.26 in 4 18.6 mm/0.73 in
7