Table of Contents
Advertisement
Control Panel Functions
The MedView Tethered Remote control panel buttons functions are described below:
Connecting Tethered Remote Control to MedView System
The Tethered Remote Control is connected to the USB 2 port
on the rear of the MedView system as shown in Figure 31.
Ensure the Control Panel is connected before powering the
MedView system.
Copyright 2021 Iron Bow Technologies
Figure 32 – Tethered Remote Control Functions
Description:
1. Pan and tilt the camera
(2nd function: moves self-view PIP)
2. Zoom camera in.
3. Zoom camera out
4. Decrease speaker volume.
5. Increase speaker volume
6. Accept new PIP Location
7. ESC. - Reset Camera
8. Answer incoming call/place call
9. End or reject call
10. Mute/Unmute microphone
11. Enable/Disable video privacy
12. Display/Transmit presentation source
13. Enable/Disable Self View Mode
(2nd function: Activate PIP Location)
Figure 33 – Connecting the Tethered
Remote Control
33
Advertisement
Table of Contents
