Table of Contents
Advertisement
Appendix. 3. – Tethered Remote Control
As an option for the MedView, a tethered remote control is
available that can be used within the room for controlling basic
system functions, as outlined below. The tethered remote control
is fitted with a coiled cable which is a nominal 28" in length when
fully closed and can expand to approximately 60" when fully
extended.
As the Tethered Remote Controller is tethered and uses a Tactile
Membrane panel, it does not require batteries, is not easily lost or
misplaced and can easily be cleaned.
The Tethered Remote Controller is supplied as standard with a
wall mounting holder are shown in Figure that can be attached in
a suitable location via either two screws M4 countersink screws or
using an adhesive tape (not supplied). The dimensions of the wall
mounting are shown in Figure. 31.
Copyright 2021 Iron Bow Technologies
Figure 30 – Tethered Remote
Controller System
Figure 31 – Tethered Remote
Controller Holder
32
Advertisement
Table of Contents
