Medview Administration; Accessing The Codec Web Interface - Cisco MEDVIEW-C-30XS-A01 Installation And User Manual

Iron bow

Table of Contents

MedView Administration

You can modify the default functions of the MedView codec by logging in as an

administrator to the codec web interface and performing the desired changes.

For the complete set of instructions, please refer to the Cisco Webex Codec plus

Administrator Guide:

https://www.cisco.com/c/en/us/support/collaboration-endpoints/spark-room-kit-

series/products-maintenance-guides-list.html

To access the web interface:

1. In your web browser address line, enter the system IP address, for example,

http://10.11.12.13

2. Enter the Admin ID as the user name (default is:

Remote Access Password, if one is set.

3. The Admin screen can now be used to navigate through the menus to the required

location to change a setting, as outlined in the following pages.

4. It is important that after any changes to the configuration are made these are

saved using the SAVE button in the top right hand corner

), and enter the Admin

admin

Table of Contents