Table of Contents
Advertisement
Changing Standby Settings
The default system configuration goes into standby mode after 1 minute with no activity.
You can change this setting to disable standby mode or change the delay after which the
system goes into standby.
To change standby settings, navigate to Setup>System Configuration>Standby.
To disable stand-by mode: Set Standby Control to Off.
To enable stand-by mode: Set Standby Control to On and set a Standby delay time
Set Standby Delay: Input the required number of minutes between 1 and 480.
Save Configuration changes: Select Save
Copyright 2021 Iron Bow Technologies
27
Advertisement
Table of Contents
