Programming Key Assignments Using Copy - RTS EKP96 Operating Instructions Manual

LEVEL 1: PANEL 45
PHONE
RELAY
LEVEL 2: RELAY 5
If a key will not accept an assignment, the destination (relay, intercom port etc.) that you are trying to assign
may have been restricted (not enabled) by the intercom system configuration software. The intercom system
configuration software can also be used to restrict individual keypanel keys to prevent key assignment.
3.5.2.9 Clearing a Level 2 Talk Key Assignment
Clear a level 2 assignment by clearing the level 1 assignment. See "Clearing or Canceling a Key Assignment",
page 29.
3.5.3

PROGRAMMING KEY ASSIGNMENTS USING COPY

There are two ways to copy key assignments: 1) you can copy a call from the incoming messages window to a
key; or 2) you can copy one key assignment to another key.
3.5.3.1 Copying a Call from the Incoming Messages Window to a Key
1. While the caller's name is displayed in the incoming messages window, tap the COPY CW key.
COPYCW
EX COPY
4
If the keypanel has alpha-numeric displays, the level 2 key assignment will
display briefly after the talk key is pressed.
PHONE
4
RELAY
KP96/KP97 Keypanel Operation Manual, Ver. 8.3G 25