Table of Contents
Advertisement
CS7500 Features
The CS7500 is a commercial, electronic, 7-day,
multi-stage, programmable, touchscreen thermo-
stat. It also offers enhanced capabilities which in-
cludes:
• Dehumidification measurement and control
• Equipment maintenance reminders
• Worry-free memory storage feature
• Menu-driven touch-screen display
This thermostat supports heat pumps (single or two-
stage) or non-heat pump units, with up to:
• Two auxiliary stages
• Two stages of heating and three stages of
cooling
• Economizer support
Product Dimensions
Unit Dimensions (H x W x D)
Case dimensions: 3-5/16 x 4-5/16 x 7/8 in. (84 x 110
x 22mm)
Wall Plate Dimensions (H x W)
Plate dimensions: 4-1/2" x 5-3/4" (114 x 146mm)
Compressor Short Cycle Protection
This thermostat is equipped with automatic com-
pressor protection to prevent potential damage due
to short cycling or extended power outages.
A 5-minute compressor short cycle protection timer
begins when a compressor output is de-energized.
Also, if a power loss occurs, the system will go into
compressor protection mode and display "waiting"
next to either a snowflake (compressor cooling), or
flame (compressor heating) in the display.
Internal and External Temperature Sensors
See information starting on page 9 for sensor wir-
ing and configuring sensor settings under Installer
Settings menu.
WARNING
Improper
installation,
service or maintenance can cause property
damage, personal injury or loss of life.
Installation and service must be performed
by a licensed professional HVAC installer (or
equivalent) or service agency.
3
adjustment,
alteration,
Advertisement
Table of Contents
