Related Manuals for Lennox ComfortSense 7500 Series
Summary of Contents for Lennox ComfortSense 7500 Series
- Page 1 ComfortSense 7500 Commercial ® Thermostat 507505-02 User Guide 6/2018 Supersedes 5/2017...
-
Page 2: Table Of Contents
Table of Contents Home Screen Temperature Indicator Features..............2 Home Screen Temperature Indicator ....2 2:31 am | thurs Ⓐ Ⓒ Home Screen Information ........3 Ⓑ occupied Operating Mode Selection ........5 Select Modes ..............5 Ⓕ heat−to Fan Operation ..............6 Ⓓ inside 72°... -
Page 3: Home Screen Information
F. The yellow line indicates the actual room C. Displays current time. temperature on the temperature dial indicator. D. Menu - This will allow access to notifications, performance report, schedules and settings. Home Screen Information E. This allows you to set the heat-to (if enabled) temperature. - Page 4 • From the override setting screen, the Table 1. System Status Icons options are 1 hour, 2 hour or next scheduled period. Make selection and then touch set. Description • For the 1 or 2 hour setting the home Icon NOTE: Touching the icon will display a screen will indicate schedule hold until time text description.
-
Page 5: Operating Mode Selection
setup for up to four days. Go to menu > user Table 1. System Status Icons settings > edit schedules and select Holiday. To exit Holiday mode, touch the cancel button on Description the home screen. Icon NOTE: Touching the icon will display a M. -
Page 6: Fan Operation
2. HEAT ONLY allows only heating demand. Table 2. Fan Operation 3. COOL ONLY allows only cooling demand. Icon Mode Description 4. OFF indicates system has been turned off. Fan is NOT following the 5. EMERGENCY HEAT allows heat pump system schedule and runs continuously to use a secondary heat source to come on until it is changed from the... -
Page 7: User Menu Screen
• Touch the contractor info option for assistance. User Menu Screen Touch the three lines in the upper right-hand cor- notifications < ner of the screen to access the menu. Selectable options under menu are notifications, performance reminders critical report, edit schedules and settings. high temperature protection 05/22 12:23pm error code: 0004... -
Page 8: Performance Report
The edit schedules screen will allow section of up erForMance eport too three separate schedules. On the edit schedules screen, each schedule can be renamed and edited. This will display the total number of hours each See “Figure 8. Renaming and Editing Schedules” month that the system has been running. - Page 9 select days · individual days week/weekend · · all 7 days edit schedules schedule x To navigate to the next (rename) screen in the selection · schedule 1 select mode process, always touch the schedule 2 · select days · ·...
-
Page 10: User Settings Menu
User Settings Menu Table 3. User Settings (General) Setting Selection Function Description See “Fan Operation” on page 6. normal Heats home to desired tempera ture setting. Options are on or off. If system is two-stage heating or cooling, then 2nd stage is locked in comfort until demand is satisfied. - Page 11 Table 3. User Settings (General) Setting Selection Function Description Media filter, humidity pad, routine system check up, UV lamp, metal insert for PureAir and customer reminders 1 and 2*. reminders - Items on this Options for each reminder are disabled (default), 3mon, 6mon, 12mon, 24mon or a list are by default disabled.
- Page 12 Table 3. User Settings (General) Setting Selection Function Description general - provides Pre-Occupancy: Options are 0 through 3 hours with a default of 0 hour. information about the This selection opens the dampers early, either 1, 2 or 3 hours. thermostat and settings for occupancy Post-Occupancy: Options are 0 through 3 hours with a default of 0...