Assembly Instructions - Stamina inMOTION Compact Strider Pro Owner's Manual

ASSEMBLY INSTRUCTIONS

Place all parts from the box in a cleared area and position them on the floor in front of you. Remove
all packing materials from your area and place them back into the box. Do not dispose of the packing
materials until assembly is completed. Read each step carefully before beginning. If you are missing
a part, please go to staminaproducts.com under the Customer Care section and order the part
needed, e-mail us at customer.care@staminaproducts.com, or call us toll free at 1-800-375-7520
(in the U.S.). Our Customer Care Staff is available to assist you from 7:30 A.M. to 5:00 P.M. (Central
Time) Monday through Thursday and 8:00 A.M. to 3:00 P.M. (Central Time) on Friday.
STEP 1
Attach the REAR STABILIZER(34) to the MAIN FRAME(27) with BUTTON HEAD BOLTS(M10x1.5x43mm)
(33) and NYLOCK NUTS(M10x1.5)(32).
STEP 2
Attach the BASE BOARD(85) to the MAIN FRAME(27) with the STANDS(9), BUTTON HEAD
BOLTS(M8x1.25x16mm)(10), and FLANGE BOLTS(M8x1.25x15mm)(38).
7