Operation Modes - Omron ZS-HL Series User Manual

Operation Modes

The ZS-HL has the following 3 operating modes. Switch to the desired mode before you
start operation.
To switch the operating mode, use the mode switch.
Mode
RUN Mode
TEACH Mode
FUN Mode
When you switch the operating mode after changing the measurement conditions, you will be prompted
to save the settings. Save the settings as required. If you turn off the Sensor Controller without saving
these settings, the newly set measurement conditions will be cleared from memory. You can also save
all the settings later on.
Saving the Settings Data p.5-29
LD ON ZERO ENABLE
H
P
L
Normal operating mode
This mode is for setting the judgment threshold values.
Mode for setting the measurement conditions.
Operation Modes
TEACH
FUN RUN
Description
Section 1
ZS-HL
1-7
User's Manual