Table of Contents
Advertisement
ENG
pGD
6.
The controller warns that no application has been loaded.
pGD
7.
The application update then starts.
pGD
8.
Remove the pendrive. The update is complete. Wait for the display
to stop fl ashing, indicating that the controller is being reset before
restarting.
pGD
Copyright HPL March 2021
pRack PR300T +0300018EN rel. 1.5 - 02.05.2017
Fig. 10.w
Fig. 10.x
Fig. 10.y
Fig. 10.z
Fig. 10.aa
Fig. 10.ab
Fig. 10.ac
Important: As can be seen, when updating the BIOS and the
application, the pGDE terminal shows the message "NO LINK", meaning
that no connection is established. Do not remove the terminal and wait
for the end of the update procedure, when the pGDE terminal replicates
the messages on the built-in display.
Note: Autorun run is especially useful in those cases in which the
same operation needs to be performed on several controllers. For
example, to load diff erent applications on controllers connected in a
pLAN network, only one autorun fi le needs to be created; this uploads
the various directories contained on the pendrive based on the address
of the controllers. The controller with address XY will only load the
directory called "nomedir_XY" ["DirName_XY"]. The pendrive then only
needs to be plugged into each controller to run the upload, confi rming
from the shared terminal.
10.3.5 Manual upload
To manually upload the contents of the pendrive the user must access
the management menu from the system screens, selecting UPLOAD and
then MANUAL. The fi les are selected by pressing ENTER when the cursor
is on the desired fi le name. A selected fi le is marked by the symbol "*" on
the left. Once the fi les have been selected (all in the same directory), press
PRG to start the upload. To display the contents of a directory press ENTER.
To go up one directory level press ESC. Once the upload has started, the
messages shown on the screen are the same as in automatic and autorun
mode.
10.3.6 Download
As mentioned above, the DOWNLOAD operation can be managed in two
ways:
1.
Manual mode: follow the steps described in the paragraph
"Automatic upload" and select manual operation. Then each fi le
must be selected and downloaded.
2.
Autorun mode: prepare a fi le called "autorun.txt", containing a string
that identifi es the function to be performed.
Function
DOWNLOAD the application
DOWNLOAD non-volatile memory Download non volatile memory (.dev)
DOWNLOAD the entire contents of
the pRack
The result is the creation of fi les with the required extensions, which will
be placed in the respective directories as described in the paragraph "File
names". When the operation is completed, the display shows a message
with the name of the directory created.
[FUNCTION]
Download application
The following screen will be displayed.
1.
Press Enter to confi rm.
2.
Download completed.
92
Page 141 of 169
String
Download application
Copy pRack download
Fig. 10.ad
Fig. 10.ae
P4367 Rev 01
Advertisement
Chapters
Table of Contents
