Table of Contents
Advertisement
easy-Drive 200R
November 2023
2. Remove any positioning licenses to a license dongle if you wish to use them on a different device.
3. Perform a Restore to Defaults operation on the control board if the control board is to be used on a different
actuator.
Figure 17. Fisher easy-Drive Configuration Defaults
4. Remove actuator and mounting kit from the valve body.
Assembly
1. Connect actuator and mounting bracket to valve body.
2. Replace the top of the explosion proof enclosure (key 3) and tighten cap screws (key 32) to 40.7 N•m (30 lbf•ft).
20
Instruction Manual
D104742X012
Advertisement
Table of Contents
