Wireless Function Notes - Canon EOS 2000D Instruction Manual

Wireless Function Notes

If the transmission rate drops, the connection is lost, movies are not
displayed smoothly, or other problems occur when using the wireless
functions, try the following corrective actions.
Installation of the Target Device or an Access Point Antenna
When using indoors, install it in the room where you are using the

camera.
Install it so that people or objects do not come between it and the

camera.
Nearby Electronic Devices
If the transmission rate of a wireless LAN drops because of the
influence of the following electronic devices, stop using them or move
further away from the devices to transmit communication.
The camera communicates over wireless LANs via IEEE 802.11b/

g/n using radio waves in the 2.4 GHz band. For this reason, the
wireless LAN transmission rate will drop if there are Bluetooth
devices, microwave ovens, cordless telephones, microphones,
smartphones, other cameras, or similar devices operating on the
same frequency band nearby.
Notes for Using Multiple Cameras
When connecting multiple cameras to one access point, make

sure the cameras' IP addresses are different.
When multiple cameras are connected to one access point, the

transmission rate drops.
When there are multiple IEEE 802.11b/g/n (2.4 GHz band) access

points, leave a gap of five channels between each wireless LAN
channel to reduce radio wave interference. For example, use
channels 1, 6, and 11, channels 2 and 7, or channels 3 and 8.
132